39

VIDEO /

AUDIO

- Select Mono sound mode if the signal is not clear or in poor signal reception areas.
- STEREO and SAP modes are available only if included on the broadcast signal.
On-screen display in stereo mode: STEREO
On-screen display in bilingual mode: SAP
- Bilingual (second audio program) signal
●This signal contains the secondary language signal in addition to the primary language.
●There are primary and secondary language and stereo modes in bilingual signals.
●[MONO]: The primary language is heard from left and right speakers in mono sound.
●[STEREO]: The primary language is heard from left and right speakers in stereo sound.
●[SAP]: The secondary language is heard from both left and right speakers in mono sound.
Mono Stereo SAP
Selecting Bilingual Signal (Second Selecting Bilingual Signal (Second Audio Program)Audio Program)
1

Press the mts button on the remote control.

3

Press the enter (A) button to save.

2

Use the mts button to change the audio mode.

●Each press of mts button changes the audio mode as
shown below.