LG Electronics LSE3092ST manual Setting Surface Controls, Hot Surface Indicator, Using The Element

Models: LSE3092ST

1 50
Download 50 pages 21.19 Kb
Page 11
Image 11
S U R FA C E C O N T RO L S C O O K I N G

S U R FA C E C O N T RO L S C O O K I N G

 SETTING SURFACE CONTROLS SETTING SURFACE CONTROLS

Use to operate the surface elements. The control knobs can be set anywhere between HI and LO.

Place pan on surface element.

There are element indicator lights above the each

Push in and turn the knob in either direction to the

knob on the control panel. When any control knob

is turned on, the light will glow.

 

desired heat setting.

 

 

 

 

 

NOTE:

OFF

 

 

ON

The Control Panel is marked

 

 

to identify where the

 

 

 

 

element is.

After cooking, turn knob to OFF

 

ENGLISH

 HOT SURFACE INDICATOR HOT SURFACE INDICATOR

A Hot Surface indicator light will glow when the surface is too hot to touch because of the heating element. It will remain on after the element is turned off and the surface has cooled to approximately 150 deg F.

 USING THE ELEMENT CAUTION

DO NOT touch surface elements until it has cooled down sufficiently.

-The surface elements may still be hot and burns may occur.

To turn on a SINGLE surface unit: USING THE ELEMENT

To turn on a SINGLE surface unit:

(Left Rear, Right Rear)

Push the knob in.

Turn the knob in either direction to the setting you want.

The control knob clicks when it Is positioned at both OFF and HI.

22

1

To turn on a DUAL surface unit: (Left Front) CAUTION

NEVER leave food unattended at high or medium- high setting.

-Boil overs can cause smoke. Greasy spillovers may catch on fire.

To turn on a DUAL surface unit: (Left Front)

There is one dual element located in the left front position. This allows you to change the size of element.

Push the knob in.

Turn the knob counterclockwise to the

SINGLE surface unit settings.

Turn the knob clockwise to the DUAL surface unit settings

e

Dual

Singl

 

22

AB

1 Manual background

Heating with inner

Heating with both

(smaller)element only

elements together

AB

11 Manual background

Page 11
Image 11
LG Electronics LSE3092ST manual Setting Surface Controls, Hot Surface Indicator, Using The Element, English