LG Electronics RCT699H owner manual Hdmi Connection, Additional Information for Hdmi, About Hdmi

Connecting 15

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor.

Rear of this unit

HDMI cable

TV

Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Additional Information for HDMI

yy When you connect a HDMI or DVI compatible device make sure of the following:

-- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-- The connected device’s video input is set correctly for this unit.

-- The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.

yy Not all HDCP-compatible HDMI or DVI devices will work with this player.

-- The picture will not be displayed properly with non-HDCP device.

-- This player does not playback and TV screen is changed to black screen.

,,Note

yy When you use the HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RES. button on the front panel.

yy If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 28).

yy When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

yy If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 28).

yy If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 28). To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

yy The arrow on the cable connector body should face up for correct alignment with the connector on the recorder. If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 28).

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices.

HDMI was developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video,

a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

2

Connecting