LG Electronics RCT699H owner manual Connecting to an Amplifier, Amplifier/Receiver

Connecting 17

Connecting to an Amplifier

Connecting to an Amplifier via Digital Audio Output

Connecting to an amplifier equipped with two channel analog stereo.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

Amplifier/Receiver

OPTICAL COAXIAL

DIGITAL INPUT

OPTICAL COAXIAL

1.Connect one of the Recorder’s DIGITAL AUDIO OUTPUT jacks (OPTICAL or COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (Optical or Coaxial) audio cable.

2.You will need to activate the Recorder ’s digital output. (See [Audio Settings] on page 28).

,,Note

yy If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

yy Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

yy To see the audio format of the current DVD in the on-screen display, press AUDIO.

yy This Recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this Recorder to a DTS compatible receiver via one of this Recorder’s digital audio outputs.

yy While viewing a digital channel, the 2 channel stereo audio is only output through the audio output jacks.

yy A digital multi-channel connection provides the best sound quality. For this you need

amulti-channel Audio/Video receiver that supports one or more of the audio formats supported by your Recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

2

Connecting

Rear of this unit