1
IMPORTANT SAFETY INSTRUCTIONS
Save These Instructions.
This manualcontains importantinstructions that shouldbe followed during installationof your
Series 600T UPS and batteries.
WARNING
EXERCISEEXTREME CARE WHEN HANDLING UPS CABINETS
TO AVOID EQUIPMENTDAMAGE OR INJURY TO PERSONNEL.
THE UPS MODULEWEIGHT RANGES UP TO 12,000 POUNDS
(5,455 KG),INCLUDING INPUT TRANSFORMER. THE BATTERY
CABINETS WEIGH BETWEEN 3000 POUNDS (1364 KG) AND 4900
POUNDS (2227 KG).
LOCATE CENTER OF GRAVITY SYMBOLS BEFORE HANDLING
EACH CABINET. TEST LIFT AND BALANCE THE CABINETS
BEFORE TRANSPORTING. MAINTAIN MINIMUM TILT FROM
VERTICAL ATALL TIMES.
SLOTS AT THE BASEOF THE MODULES AND BATTERY
CABINETS ARE INTENDED FOR FORKLIFT USE. BASE SLOTS
WILL SUPPORT THEUNIT ONLY IF THE FORKS ARE
COMPLETELY BENEATH THE UNIT.
SYSTEM CONTROLCABINETS (SCC’S) HAVE HOLES
INTENDED FORRIGGING BARS OR CHAINS. PREVENT
CHAINS OR CABLESFROM CONTACTING CABINET BY USING
SPREADER BAR AND ADEQUATE PADDING.
FOLLOW ALL BATTERY SAFETY PRECAUTIONS WHEN
INSTALLING,CHARGING, OR SERVICING BATTERIES. IN
ADDITION TO THE HAZARD OF ELECTRIC SHOCK, GAS
PRODUCED BY BATTERI ESC AN BE EXPLOSIVE AND
SULFURIC ACID CAN CAUSE SEVERE BURNS.
IN CASE OF FIRE INVOLVING ELECTRICAL EQUIPMENT,
ONLY CARBON DIOXIDEFIRE EXTINGUISHERS, OR THOSE
APPROVED FOR USE IN ELECTRICAL FIRE FIGHTING,
SHOULD BE USED.
EXTREME CAUTION IS REQ UIRED WHEN PERFORMING
MAINTENANCE.
BE CONSTANTLY AWARE THAT THE UPS SYSTEM CONTAINS
HIGH DC AS WELL AS AC VOLTAGES.
CHECK FOR VOLTAGEWITH BOTH AC AND DC VOLTMETERS
PRIOR TO MAKING CONTACT.