•Replace the test strip bottle cap immediately after removing a test strip and close the cap tightly.
•Do not use test strips that are bent, torn, cut, or damaged in any way.
•Use each test strip immediately after removing it from the bottle.
•Do not transfer test strips to a new bottle or any other container.
•Compare the color of the test strip confirmation dot to the “Unused” color dot shown on the Color Chart on the test strip bottle label. If the color of the test strip confirmation dot is darker than that shown on the Color Chart, do not use the test strip. The result may be inaccurate.
•You have up to 2 minutes to insert the test strip into the meter after applying blood or control solution. If you insert the test strip after 2 minutes, you may get an inaccurate result or an error message.
