Settings and Memory
A three-tone beep sounds when OFF is first displayed. Then it will flash silently until the meter turns off.
Exiting Set-up Mode
You may exit set-up mode at any time by pressing the blue power button and holding it down to turn off the meter.
Meter Memory
The SureStep Meter is pre-set to automatically display the last test result when the meter is turned on. The meter stores the 10 most recent blood glucose and control solution test results in its memory. When the memory is full, the oldest test result is dropped as the newest is added.
Using the Meter for the First Time
Each time you turn on the meter, check that all symbol segments appear on the display (see “Display Symbols” on page 4). The first time you turn on the meter, the following
