Lifescan Blood Glucose Monitor manual Replace the test strip holder

Cleaning and Maintenance

2Clean the lens area and contact points. Using a cotton swab or a cloth moistened with a 10% bleach solution, wipe the lens area and contact points.

Contact points

Lens area

Wipe this area even if it doesn’t appear to be dirty. Use a swab or cloth moistened with water to remove any residual bleach. Dry with a soft, dry cloth or lint-free tissue. Be careful not to scratch the lens area or get water inside the meter.

3Replace the test strip holder.

Slide the closed test strip holder into the meter. Push the holder until it clicks into place. Make sure the test strip holder is

54 Cha pt e r 4