Cisco Systems Release 4.2 manual Items Required for Installation, Description

Chapter 1 Overview

Planning for Your Installation

•Information Required for Configuring a Multi Services Platform, page 1-4

•Information Required for Configuring VSM, page 1-5

Items Required for Installation

Table 1-2describes the items that a typical installation requires.

Table 1-2	Required Items
Item		Description
Items required for all installations
Power source and power protection.		The Multi Services Platform connects
		to a standard 110 volt AC outlet.
Network connectivity.		The Multi Services Platform connects
		to your network with a standard
		Category 5 network cable.
		The network should be set up and
		configured before you begin.
Keyboard, monitor, and mouse.		Performing the initial configuration of
		the Multi Services Platform requires
		you to connect a keyboard, monitor,
		and mouse to the device.
		You can use a standard PC monitor.
		The keyboard and mouse can have
		standard 6-pin or USB connectors.

Items required for rack mounting a Multi Services Platform

Rack.

The device mounts in a standard

19-inch wide rack. The rack should be between 30 and 33 inches deep.

For information about appropriate racks and environments, see the “Preparing to Rack Mount” section on page 2-4

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01		1-3