Cisco Systems Release 4.2 manual YaST2 Window

Chapter 2 Setting Up and Configuring the Multi Services Platform

Performing the Initial Configuration of the Multi Services Platform

Figure 2-8 YaST2 Window

Step 3 In the YaST2 window, make sure that the Traditional Method with ifup radio button in the Network Setup Method area is selected (see Figure 2-8), then click Next.

Step 4 Take these actions:

a.Make sure that the first controller that is listed in the Network Card Configuration Overview area is selected, as shown in Figure 2-9.

Note The network cards that appear on your system may be different than the ones shown here.

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01		2-17