Cisco Systems Release 4.2 manual Accessing Video Surveillance Operations Manager

Chapter 3 Configuring VSM

Configuring VSM

Accessing Video Surveillance Operations Manager

You perform the basic configuration of VSM by using the VSOM Operations Manager, which you control through the VSOM Operator pages. You can access these pages from a client PC that meets the requirements that the “Client PCs” section on page 1-10describes.

To access the VSOM Operations Manager, perform the following steps.

Before you begin, make sure that you have performed the steps that are described in the “Setting the VSOM Log In Page as the Default Web Page” section on page 3-1.

Procedure

Step 1 On a client PC, take these actions:

a.Start Internet Explorer.

b.Enter the IP address or the host name of the Multi Services Platform server that is running VSOM.

Step 2 In the dialog box that prompts for a user name and password take these actions:

a.In the Username field, enter root. The user name is not case sensitive.

b.In the Password field, enter secur4u. The password is case sensitive.

c.Click OK.

Note If you are prompted to install the ActiveX controller (AXclient), follow the on-screen prompts to do so. ActiveX is required to display video through VSM. You are prompted to install the ActiveX controller the first time that you log into VSOM.

The VSOM Operator page appears, as shown in Figure 3-5.

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01		3-5