Chapter 3 Configuring VSM
Configuring VSM
Video encoders are required only if your deployment includes analog cameras. If you will not use video encoders, skip this section.
Procedure
Step 1 Access the VSOM Operations Manager as described in the “Accessing Video Surveillance Operations Manager” section on page
Step 2 In the VSOM Operator page, click the Admin link, which appears near the top left of the page (see Figure
Figure | Admin Link |
The Administration area appears.
Step 3 Click Encoders under Devices in the left panel of the VSOM Operator page, as shown in Figure
| Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2 |
|
