Chapter 2 Setting Up and Configuring the Multi Services Platform

Performing the Initial Configuration of the Multi Services Platform

Figure 2-21

NTP Server Area

Step 10 In the NTP Server area, take these actions:

a.In the Address field, enter the IP address or host name of your NTP server.

b.(Optional) Click Test to make sure that the Multi Services Platform can access the NTP server.

c.Check the Use for Initial Synchronization check box.

d.Click OK.

Step 11 In the Advanced NTP Configuration screen, click Finish.

 

Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2

2-28

OL-19733-01

Page 50
Image 50
Cisco Systems Release 4.2 manual Check the Use for Initial Synchronization check box