Lincoln 1400, 1200, 1000 service manual Reg Min

PLACE DIGITAL VOLTMETER LEADS ON terminal S1 and S2, adjust the max pot. for a reading of 3.4 VDC.

Place METER LEADS on terminals A1 and A2. Adjust the reg. pot. for a reading of 125 VDC. NOTE: In some instances when the input AC voltage runs on the high side of the normal input range, you may have difficulty adjusting the max. pot. for a reading of 3.4 VDC. In this instance, a reading of 3.45 VDC is acceptable.

Adjust speed pot to obtain the proper time setting for the conveyor to meet customers desired speed .

Check conveyor travel in a no load situation to insure conveyor belt is traveling at a constant speed.

3A.

FUSE

GND

S3 S 2 S 1 A 2 A 1 F 2 F 1 L 2 L 1

D. C. CONTROL BOARD "BODINE" S/N 100-4389

		REG MIN		MAX
					TERMINAL
3 A. FUSE
					STRIP
	D. C. CONTROL BOARD "BODINE" S/N 100 4389
			( TOP VIEW )

Impinger I -–1000 Series Service Manual - Domestic 45