BURNER ALARM LIGHT - REPLACEMENT

1.Remove control panel top and front cover.

2.Remove two (2) wires from light assembly, note wire number and location.

3.Grasp body of light assembly and slide sideways to remove.

4.Reassemble in reverse order and check.

PILOT LIGHT (220V) - REPLACEMENT

1.Remove control panel top and front cover.

2.Remove switch access cover.

3.Remove two (2) wires from light assembly, note wire number and location.

4.Grasp body of light assembly and slide sideways to remove.

5.Reassemble in reverse order and check.

IGNITER SENSOR ASSEMBLY - REPLACEMENT

1.Remove control panel top and front cover.

2.Remove gas valve assembly (See Gas Valve)

3.Remove screws from burner tube and pull burner assembly out.

4.Remove wire connectors from igniter sensor assembly.

5.Remove screws from mounting bracket and remove assembly.

6.Reassemble in reverse order and check system operation. NOTE: After installation, check all pipe fittings for leaks.

BURNER BLOWER MOTOR – REPLACEMENT

1.Remove control panel top and front cover.

2.Remove screws around blower tube.

3.Disconnect motor wiring and remove.

4.Reassemble in reverse order and check system operation.

TEMPERATURE CONTROL BOARD - REPLACEMENT- MODEL 1030

1.Remove control panel top and front cover.

2.Remove potentiometer leads (3), note color and location.

3.Remove thermocouple leads (2), note color and location (white:pos/red:neg.).

4.Remove power and solenoid leads (4), note wire number and location.

5.Remove screw and board assembly and replace.

6.Reassemble in reverse order and check system operation.

NOTE: When replacing #369174 with (new) #369728, turn temperature control to its maximum position and allow oven 30 minute preheat then calibrate board as follows:

Place temperature probe between top fingers #2 and #3 (making sure probe is not touching any metal) and adjust potentiometer P6 to a Maximum temperature of 575°F.

RED

 

POTENTIOMETER

 

 

2.5 K OHMS

BLACK

1

P 6

P 5

2

 

 

 

WHITE

3

 

11

 

 

+

 

 

10

6

P 3

9

-

7

 

 

 

 

 

 

THERMOCOUPLE

 

 

 

TYPE J

 

 

 

transformer marked with green gold or silver dot

L 1 120 VAC

L2

LOAD

Impinger I -–1000 Series Service Manual - Domestic

57

Page 57
Image 57
Lincoln 1400, 1200, 1000 Burner Alarm Light Replacement, Pilot Light 220V Replacement, Igniter Sensor Assembly Replacement

1000, 1200, 1400 specifications

The Lincoln series, particularly the models Lincoln 1000, 1200, and 1400, represents an evolution in luxury vehicles, combining elegance with cutting-edge technology. Each model builds upon its predecessor while introducing features that enhance performance, comfort, and safety.

Starting with the Lincoln 1000, this model set the foundation for the series. It showcased a refined design characterized by sleek lines and an impressive presence on the road. The Lincoln 1000 was equipped with a powerful engine, delivering smooth acceleration and a quiet ride. Interior features included premium materials such as leather upholstery, real wood accents, and a state-of-the-art sound system. Additionally, it offered advanced climate control systems, ensuring passenger comfort. Safety features were also prioritized, with multiple airbags and stability control systems included to enhance driver confidence.

Moving on to the Lincoln 1200, this model took luxury to the next level. The exterior design was more aggressive, with a revised grille and enhanced aerodynamics for better fuel efficiency. The engine options expanded, offering hybrid technology for environmentally conscious consumers without sacrificing power. Inside, the Lincoln 1200 featured an upgraded infotainment system, incorporating a larger touchscreen display along with smartphone integration for connectivity on the go. This model also introduced adaptive cruise control and lane-keeping assist, showcasing Lincoln’s commitment to safety and innovation.

The Lincoln 1400 represents the pinnacle of this series. This model incorporates all the advancements of the previous iterations while introducing next-generation technologies. A hybrid powertrain with electric capabilities provides a quieter, more efficient drive. The design includes sophisticated lighting technology, such as adaptive LED headlights that adjust to road conditions. Inside, the cabin has been transformed into a haven of luxury, with customizable ambient lighting, heated and ventilated seats, and an advanced noise cancellation system for a serene driving experience. Furthermore, the Lincoln 1400 emphasizes driver assistance technology, featuring an array of sensors and cameras to support features like automatic parking and enhanced collision prevention systems.

In conclusion, the Lincoln 1000, 1200, and 1400 models showcase a remarkable journey of luxury and technology, with each iteration bringing forth innovative features and design enhancements that elevate the driving experience. As Lincoln continues to evolve, the commitment to craftsmanship, comfort, and cutting-edge technology remains central to its identity.