TROUBLESHOOTING GUIDE

3240-2*

230VAC

50 HZ.

1 PHASE

3262-2*

230VAC

50 HZ.

1 PHASE

3270-2*

230VAC

50 HZ.

1 PHASE

*NOTE:

Model number ending in TS indicates top belt is split belt

Model number ending in SB indicates bottom belt is split belt

Model number ending in SS indicates both belts are split belts

SYMPTOM

POSSIBLE CAUSE

EVALUATION

Oven fan will not run

Incoming power supply

Check circuit breakers. Reset if required. Call power

 

 

co. if needed.

 

Fuse, 2 Amp, control (F7)

Check, replace if necessary.

 

Fuse holder

Check, replace if necessary.

 

Switch, oven fan

Check continuity between switch terminals. Replace

 

 

switch as needed.

 

30 minute time delay relay

Check for supply voltage to 30 minute time delay relay

 

 

at terminals #2 and #3. If no voltage is present, trace

 

 

wiring back to main power switch. If there is supply

 

 

voltage at terminals #2 and #3, check for output voltage

 

 

at terminals #1 and #3. If there is incoming voltage but

 

 

no output voltage, and the main power switch is on,

 

 

replace the 30 minute time delay relay.

 

Relay, main fan

Check for supply voltage to relay contacts, if no voltage

 

 

is present, trace wiring back to power supply. Check for

 

 

supply voltage to the coil of the main fan relay. If no

 

 

voltage is present, trace wiring back to the 30 minute

 

 

time delay relay, check to be sure that the Overload

 

 

Protector contacts are closed. If contacts are open, see

 

 

“Overload Protector” below. If voltage is present, check

 

 

to insure relay contacts are closing. Replace relay as

 

 

needed.

 

Overload protector, main fan

Check to be sure overload contacts are closed. If not

 

 

closed, re-set overload. If contacts do not close,

 

 

replace overload protector. If contacts close, test for

 

 

proper operation. If the overload contacts do not stay

 

 

closed, and the amperage is below the overload

 

 

setting, replace the overload protector.

 

 

3240 should be set at 13A

 

 

3260 should be set at 18A

 

 

3270 should be set at 18A

 

Main fan motor

Check for supply voltage at motor. If no voltage is

 

 

present, trace wiring back to the overload protector.

 

 

WITH POWER OFF: Check for opens, shorts or

 

 

grounds. Turn motor shaft to check for locked rotor.

 

Capacitor

Check for shorts or grounds.

 

 

WARNING: Capacitor has a stored charge, discharge

 

 

before testing.

 

Drive belt

Check for loose or broken drive belt. Adjust motor for

 

 

proper belt tension (maximum of 3/8-inch deflection), or

 

 

replace drive belt as needed.

 

 

 

 

Bearings, Fan shaft

Check for any damage or excessive wear on the shaft

 

 

bearings. Replace bearings as needed.

Impinger X2 – Analog Service Manual – Dom & Int’l

11

Page 10 Page 12
Page 11
Image 11
Lincoln 3240-2, 3262-2, 3270-2 service manual Troubleshooting Guide
Page 10 Page 12

3240-2, 3270-2, 3262-2 specifications

The Lincoln 3270-2 is a state-of-the-art welding machine designed for professional welders who require precision, efficiency, and reliability in their welding tasks. This versatile unit is particularly well-suited for MIG and TIG welding, making it an essential tool for both industrial applications and hobbyist projects.

One of the standout features of the Lincoln 3270-2 is its advanced inverter technology. Inverter technology allows for a more compact design while delivering high power output. This results in a machine that is lightweight and portable, yet capable of handling demanding welding jobs with ease. The inverter system also enhances efficiency, reducing overall energy consumption while maintaining excellent welding performance.

The 3270-2 is equipped with a user-friendly interface, providing welders with intuitive controls to easily adjust settings such as voltage, wire feed speed, and gas flow. Its digital display allows for quick monitoring of parameters, enabling users to make precise adjustments on the fly. This feature is especially beneficial for novices who may need a bit of guidance while getting accustomed to the different welding processes.

Another notable characteristic of the Lincoln 3270-2 is its compatibility with a wide range of materials and thicknesses. It effectively welds various metals, including mild steel, stainless steel, and aluminum, making it suitable for numerous applications. The machine can effortlessly adapt to a variety of welding tasks, from thin sheet metal work to thicker structural components.

Safety is a top priority in the design of the 3270-2. It comes equipped with several integrated safety features, including thermal overload protection, which prevents the machine from overheating during extended use. This attention to safety helps to protect both the welder and the equipment, ensuring a reliable and long-lasting machine.

In addition to its impressive technical specifications, the Lincoln 3270-2 boasts exceptional build quality. The robust construction of the unit ensures it can withstand the rigors of a busy workshop or job site. Its durable outer casing provides protection against dust and debris, enhancing its longevity.

With its combination of portability, advanced technology, user-friendly interface, and robust performance, the Lincoln 3270-2 stands out as an ideal choice for professional welders. Whether for fabricating, repairs, or maintenance, this welding machine is designed to meet the high demands of modern welding practices, delivering both efficiency and superior weld quality.
Top Page Image Contents