Lincoln Electric IM10023 manual Operation, Basic Package K2803-1 Power Wave AC/DC 1000 SD

B-2 OPERATION B-2

GRAPHIC SYMBOLS THAT APPEAR ON THIS MACHINE OR IN THIS MANUAL

PENDENT

ARCLINK

CONNECTOR

WIRE FEEDER

CONTROLLER

ARCLINK INPUT

CONNECTOR

FLUX HOPPER

CONNECTOR

TRAVEL

CARRIAGE

CONNECTOR

PRODUCT DESCRIPTION

GENERAL PHYSICAL DESCRIPTION

•The MAXsa™ 10 CONTROLLER is a user interface and a feeder controller. The control is used to set all welding parameters and control any travel mech- anisms. High-speed digital cables connect the con- trol, wire drive, and the Power Wave power source together.

•The MAXsa™ 10 CONTROLLER is a self-con- tained control box designed to control the entire weld arc at one location.

•The user interface utilizes alphanumeric displays for advanced text messaging providing the end user with an intuitive interface allowing for easy set up and real-time control of all welding parameters.

•An eight button memory section has been included which provides easy storage and recall of stored welding parameters.

•The user interface can be removed from the control box and connected as a Pendant for remote control near the arc.

GENERAL FUNCTIONAL DESCRIPTION

•The MAXsa™ 10 CONTROLLER is one of the most versatile user interfaces ever created. Easy to use features make it a snap to adjust the arc for specific preferences.

•The user interface brightly displays essential weld- ing information. Use it to quickly adjust weld set- tings, arc starting parameters, arc end parameters and set-up information.

•The memories allow for up to eight weld schedules to be stored and quickly recalled. The user inter- face allows for multiple levels of limits and lockouts.

•Digital communications to the power source provide the most accurate and reliable operation possible.

•When the MAXsa™ 10 CONTROLLER is coupled to the Power Wave® AC/DC 1000 SD welding power source, the result is a welding system with the best arc performance on the market.

RECOMMENDED PROCESSES AND EQUIPMENT

•The MAXsa™ 10 CONTROLLER is best suited for submerged arc welding only with the Power Wave® AC/DC 1000 SD, the MAXsa™ 22 or the MAXsa™ 29 Feed Heads.

•SAW

COMMON BASIC EQUIPMENT PACKAGES

Basic Package

•K2803-1 Power Wave® AC/DC 1000 SD

•K2370-2 MAXsa™ 22 Wire Drive

•K2814-1 MAXsa™ 10 CONTROLLER / User Interface

•K2683-xx Control Cable (5 pin – 5 pin) - power source to MAXsa™ 10.

•K1785-xx Control Cable (14 pin – 14 pin) - MAXsa™ 10 to Wire Drive.

Optional kits

•K2312-2 MAXsa™ 29 Wire Drive (for fixture builders).

•K2311-1 Motor Conversion Kit (to convert exist- ing NA-3/NA-4/NA-5 wire feeder gear boxes).

MAXsa™ 10 CONTROLLER