OPERATION | ||
|
|
|
| SETUP MENU FEATURES |
|
The Setup Menu provides access for configuring user preferences, which are generally only set at installation. The user preferences are grouped as shown in the following table.
PARAMETER |
| DEFINITION |
P.1 through P.99 |
| Unsecured Parameters (always adjustable) |
P.101 through P.199 |
| Diagnostic Parameters (always read only) |
P.501 through P.599 |
| Secured Parameters (only accessible with Weld Manager) |
|
|
|
| ACCESSING THE SETUP MENU | |
1. ACCESS |
| 3. PREFERENCE CHANGE |
To access the Setup Menu, Press the Left Button and Right Button simultaneously. The Setup Menu Indicator will light and the lower display will read as shown below.
Note: The Setup Menu cannot be accessed during welding, or if a fault is displayed. To resume welding, exit the Setup Menu.
2. PREFERENCE SELECTION
Scroll through the Preference list by rotating the Control Knob. Press the Right Button to edit the select- ed preference.
Scroll through the preference options by rotating the Control Knob. Change the preference setting by press- ing the Right Button. To cancel, press the Left Button.
4. EXIT
To exit the Setup Menu, press both buttons simultane- ously or select P.0 and press the Left Button. Sixty seconds of inactivity will automatically exit the Setup Menu.
Note: If a product is missing any of the preference options listed below, a software update may be needed from www.powerwavesoftware.com.
FIGURE B.7 - SETUP MENU
Mode Select
Panel (MSP)
Setup Menu
P 0 Indicator
.
User Pr efs
Exit
Left Button | Right Button |
Control Knob
MAXsa™ 10 CONTROLLER
