OPERATION |
DESIGN FEATURES AND ADVANTAGES
•Separate output terminals for selecting high or low inductance as recommended for the welding process.
•Power on/off switch with pilot light and thermostat tripped indicator light.
•Full range output voltage (CV mode) and current (CC mode) control for easy operation.
•Panel switches behind a latched front panel for remote or local output control, output on or remote selection, and CC, CV
•Panel knob settable CC arc force control with
•High efficiency output, and selectable “sleep mode” idle mode timer which shuts down input power if not used for extra energy conservation.
•Fan as needed (F.A.N.). Solid state thermally con- trolled fan operates cooling fan only when required. Minimizes power consumption, operating noise and dust intake.
•Hinged cover to protect output terminals and auxil- iary connections.
•Electronic and thermostatic protection for current overload and excessive temperatures.
•42 VAC, 10 amp auxiliary power available for the wire feeder; circuit breaker protected.
•115 VAC, auxiliary power protected by a 20 amp breaker available for the wire feeder. Canadian Code 10502, European, and Export Models protected by 15 amp breaker.
•115 VAC duplex receptacle protected by 20 amp breaker is available on Domestic and Canadian Models, except for Canadian Code 10502 receptacle that is a NEMA
•220 VAC receptacle on European and Export mod- els for connecting to a water cooler. Protected by 2 amp breaker.
•Single
•Optional Field Installed Digital or Analog Voltmeter/Ammeter kits are available.
•Optional dual feeder kit for like polarity connection of two wire feeders. Easy panel installation.
•Optional Dual Process Switch for two processes with polarity change and electrical isolation.
WELDING CAPABILITY
The
650 Amps, 44 Volts at 100%
815 Amps, 44 Volts at 60%
