| TROUBLESHOOTING | |||
| Observe all Safety Guidelines detailed throughout this manual | |||
|
|
|
|
|
| PROBLEMS | POSSIBLE | RECOMMENDED |
|
| (SYMPTOMS) | CAUSE | COURSE OF ACTION |
|
|
|
|
|
|
PROBLEMS
Poor arc characteristics.
1.The negative welding cable may be connected to the wrong induc- tance tap.
2.Make sure the mode switch is in the proper position for the process.
3.The control board may be faulty. See PC board LED information.
115VAC receptacle not working.
1.Check the 115VAC circuit break- er. Reset if necessary. Make sure the load on the receptacle does not exceed the rating of the 115VAC breaker. See wiring dia- gram.
Contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance.
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
