Lincoln Electric IM613-B General Panel Installation Guidelines, Optional Panels for Control BOX

A-11 INSTALLATION A-11

OPTIONAL FEATURES INSTALLATION

A number of Optional Features are available for use with Power Feed 11. Some Installation informa- tion is provided in this section, REFER TO THE INSTRUCTIONS THAT COME WITH EACH KIT FOR DETAILED INFORMATION REGARDING INSTALLA- TION.

OPTIONAL PANELS FOR CONTROL BOX

All optional panels for the control box are described in the ACCESSORIES section of this manual along with their installation instructions as are all other pieces of optional equipment.

The PF-11 Control Box is designed to accept two con- trol panels and one door option. Panels can be mounted in one of two positions: Upper and lower.

Each Control Box is shipped with a Control/Display (CD) panel installed in the upper position, and a CV/Gouge (CV/G) panel in the lower position.

The CD panel must be installed in every Control Box. The remaining panel can be one of the following: CV/G, MX2, or MSP2.

Note: The CD panel must be installed in the upper position; its harness is not long enough to allow installation in the lower position. Similarly, option panels must be installed in the lower position.

GENERAL PANEL INSTALLATION GUIDELINES:

Installation or removal of any panel can be done with only a Phillips screwdriver after the system power is turned off. To remove a panel, remove the two screws holding it in place, remove the push-on chassis ground wire and remove the harness connection to the Control Box main PC board. To install any panel, reverse that process. Turn power back on when com- plete (option panels are only recognized at power up. Do not install panels with the power on.) Note that removal or installation of any panel may also require the removal of the other panel, in order to have easy access to the PC board connectors. Detailed installa- tion instructions are shipped with each option panel.

POWER FEED 11