Lincoln Electric IM958 manual Table B.4, Optional COOL-ARC 35 Water, Cooler

B-10			OPERATION				B-10
	Parameter	TABLE B.4 (Continued)		SET UP MENU PARAMETERS
			Selection/			Parameter	Description
	Symbol		* Default Value			Number
			Display Off			751	Output Current Displayed
			Display in 7 Segment LED
			Display*
			Display Off*			752	Output Voltage Displayed
			Display in 7 Segment LED
			Display
			Display Off*			753	Input Phase Displayed
			Display in 7 Segment LED
			Display
			Display Off*			754	Input Voltage Displayed
			Display in 7 Segment LED
			Display
		This function sets the initial start energy
		limit. Set this number to a higher setting
		than the factory default if needed to
		improve starting of large diameter tungsten
		electrodes.
		0.5 to 1.0 manual start energy setting.
		1.2 to 5.0 = max. Incrementing limit.				104	AC TIG Start Power (for AC TIG only)
		(See Note)
		Note:	The machine will try to start the arc at
			a start power of 1. If the arc does not
			establish it will incrementally increase
			the start power and try to restrike up
			to the set limit.
	OPTIONAL	COOL-ARC 35 WATER				IMPORTANT:	If the Cool-Arc 35 water cooler is
	COOLER				connected to the V310-T AC/DC and an air cooled
	The optional Cool-Arc 35 water cooler is designed to				torch is connected instead of a water cooled torch
					the Cool-Arc 35 will sense a coolant blockage
	operate in communication with the V310-T AC/DC.				resulting in a cooler error.
	Refer to the Cool-Arc 35 operator manual for installa-				In this case the cooler can be turned to the “off mode”
	tion instructions and a complete description of its
	operation.				by depressing and holding the push button on the
	When the V310-T AC/DC is powered ON the Cool-Arc				cooler until the coolerʼs display reads “oo”. To turn
					the cooler back on you can depress and hold the
	35 will automatically power ON as well. The Cool-Arc				Cool-Arc 35 push button until the coolerʼs digital dis-
	35 monitors pressure and temperature and will adjust				play reads coolant temperature in degrees Celsius.
	the pump speed accordingly to cool the torch. If a				Turning the V310-T AC/DC off and on again will auto-
	blockage of coolant or loss of coolant is sensed both				matically turn the water cooler back on as well.
	the Cool-Arc 35 and V310-T AC/DC will display an
	error and turn off the V310-T AC/DCʼs output.

V310-T AC/DC TIG