B-8

OPERATION

B-8

V310-T AC/DC TIG
USER MENU SET UP PARAMETERS
Many additional parameters can be modified via the
Set Up Menu. To access the Set Up Menu press and
hold the rotary encoder knob for several seconds until
the following screen appears: (See figure B.7)
FIGURE B.7
Rotating the encoder knob will scroll through the setup
parameters shown in Table B.4. Selected parameters
are changed in one of two ways:
For parameters like background current (shown in
Figure B.7a) the change is made by the mode push
button. In this example you can toggle between set-
ting background current as either a % or as absolute
amperage. Other parameters like selectable wave
shape (shown in Figure B.7b) are changed by
depressing the encoder knob until the parameter is
flashing. Rotating the knob changes the parameter
and then the change is saved by pressing the encoder
knob again. Once all changes are made you can exit
and save by pressing the exit icon button or you can
exit the set up menu without saving your changes by
depressing the hooked arrow button.
FIGURE B.7a
FIGURE B.7b