Lincoln Electric IM958 manual Optional Accessories, Compatible Equipment, Field Installed

C-1		ACCESSORIES			C-1
OPTIONAL ACCESSORIES			TIG TORCH STARTER KITS
AND COMPATIBLE EQUIPMENT			K2266-1 – TIG-Mate 17 Air Cooled TIG Torch
Field Installed			Starter Pack.		One complete easy-to-order kit pack-
			aged in its own portable carrying case. Includes: PTA-
K857 - Remote Output Control	- For Stick welding.		17 torch, parts kit, Harris flowmeter/regulator, 10 ft.
			gas hose, Twist-Mate™ adapter, work clamp and
Portable current control provides the same range as			cable.
the current control on the welder. Consists of a 6-pin			K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch
connector which plugs into the remote control connec-
tor. 25 foot cable length.			Starter Pack.		One complete easy-to-order kit pack-
K870 - Foot Amptroltm for TIG welding. The foot			aged in its own portable carrying case. Includes:
			PTW-20 torch, parts kit, Harris flowmeter/regulator, 10
Amptrol energizes the output and controls the output			ft. gas hose, Twist-Mate™ adapter, work clamp and
remotely. The Foot Amptrol connects directly to the 6-			cable, and 10 ft. water hose.
pin remote control connector.			K2413-1- TIG-Mate 9 Air Cooled TIG Torch Starter
K963-3 - Hand Amptroltm for TIG welding. The hand
			Pack. One complete easy-to-order Kit packaged in its
Amptrol energizes the output and controls the output			own portable carring case. Includes: PTA-9 Torch,
remotely. The Hand Amptrol connects directly to the			Gas Lens Parts Kit, Harris flowmeter/regulator, 10 Ft.
6-pin remote control connector.			gas hose, Twist-Mate™ adapter, work clamp and
K814 - Arc Start Switch - Energizes the output for			cable.
TIG welding if remote output control of the amperage			Magnum® TIG Torches – The following standard
is not desired. It allows on/off TIG welding at the			Magnum® TIG torches may be used with the Invertec
amperage set by the Current Control on the control			V310-T AC/DC for Lincolnʼs full line of TIG torches
panel. When using the Arc Start Switch set the Output			including flex head models consult publication
Control to the “LOCAL” position.			E12.150.
K2630-1 - Cool-Arc® 35 Water Cooler- Attaches			•	K1781-1 PTA-9 12.5 ft.(3.8m) Air-Cooled 125A
underneath the V310-T AC/DC and electrically con-			•	K1781-3 PTA-9 25 ft.(7.6m) Air-Cooled 125A
nects to the V310-T AC/DC. This smart cooler varies			•	K1782-1 PTA-17 12.5 ft.(3.8m) Air-Cooled 150A
its speed based on coolant temperature and monitors
coolant pressure.			•	K1782-3 PTA-17 25 ft.(7.6m) Air-Cooled 150A
K2694-1 Inverter Cart- Conveniently holds the Cool-			•	K1783-1 PTA-26 12.5 ft.(3.8m) Air-Cooled 200A
Arc 35 and V310-T AC/DC power source. Features a			• K1783-3 PTA-26 25 ft.(7.6m) Air-Cooled 200A
tool storage tray for convenience and a cylinder plat-			• K1784-3 PTW-20 12.5 ft.(3.8m) Water-Cooled 250A
form to hold a gas bottle
			• K1784-4 PTW-20 25 ft.(7.6m) Water-Cooled 250A

• K1784-1 PTW-18 12.5 ft.(3.8m) Water-Cooled 350A

• K1784-2 PTW-18 25 ft.(7.6m) Water-Cooled 350A NOTE: Each torch requires a Twist-Mate™ adapter, collets, collet bodies, and nozzles and are not includ- ed and must be ordered separately.

V310-T AC/DC TIG