Lincoln Electric IM 513-B manual M17323

CONNECTION DIAGRAM: COMMANDER 400 S & W, CLASSIC ll, lll, lllD, 300D, 300G, SA-250,

350A & SAE-300 ENGINE WELDERS WITH WIRE FEED MODULE TO LN-23P WITH ADAPTER KIT

ENGINE WELDER WITH 115 VAC AUXILIARY

14 PIN AMPHENOL

WARNING

ELECTRIC

SHOCK

CAN KILL

Turn off input power to the Welding Power Source using the disconnect switch at the fuse box Before connecting the wire feeder.

Only qualified persons should install, use or service this machine.

N.A. WELDING CABLES MUST BE OF PROPER CAPACITY FOR THE CURRENT AND THE DUTY CYCLE OF IMMEDIATE AND FUTURE

APPLICATIONS. SEE LN-23P OPERATING MANUAL FOR PROPER SIZES.

N.B. IF ONLY ONE LN-23P IS USED, CONNECT TO FEEDER "A" TERMINAL STRIP IN ADAPTER.

– 28 –

21

+	N.D.
CV-
	N.C.

N.A.

9 CONDUCTOR ADAPTER CABLE

							K350-1
				LN-23P ADAPTER KIT
	FEEDER "A"						FEEDER "B"
602	604	75	76	77	521	602	604	75	76	77	521

N.C. REMOTE VOLTAGE SENSING LEAD TO BE EXTENDED BY CUSTOMER DIRECTLY TO WORK USING #12 OR LARGER RUBBER COVERED FLEX WIRE. WRAP WIRE AROUND WORK LEAD AND TAPE.

N.D. BOLT AND TAPE CONNECTION.

N.E. MOUNT ADAPTER IN A CONVENIENT

LOCATION - AS NOT TO INTERFERE

WITH THE NORMAL MACHINE OPERATION.

CAUTION: WHEN MOUNTING ADAPTER TO WELDER, SPECIAL CARE IS TO BE TAKEN AS NOT TO DAMAGE ANY MACHINE COMPONENTS, SUCH AS/BUT NOT LIMITED TO ELECTRICAL COMPONENTS, WIRES OR FUEL TANKS.

N.B.

WORK

LN-23P LN-23P

ELECTRODE WIRE FEEDER "A" ELECTRODE WIRE FEEDER "B"

M17323

NOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual. The specific diagram for a particular code is pasted inside the machine on one of the enclosure panels. If the diagram is illegible, write to the Service Department for a replacement. Give the equipment code number.