6.This is the screen where you set the Date and Time. After you have finished filling in the information, click Save.
7.This is the screen where you can change the Administrator’s Name and Password. After you have finished filling in the information, click Save.
NOTE: The Supervisor’s name and password can be from 1 to 19 digits. The Supervisor’s name and password is not limited to an alphanumeric character (i.e. a#1b$2z%9).
NOTE: Be sure to write down your Supervisor’s name/password and keep it in a safe place. If the user forgets the name/password the iSwitch will have to be Flash Upgraded before the user can access the iSwitch.
NOTE: It will be enhanced the security level to MD5 after the Enable Security Login checked.
33
