Chapter 2 Configuration
17
SubProduct
The Status Tab > Local Network
The Local Network screen displays information about the
local network.
Status > Local Network
The Local Network information that is displayed here
includes the local MAC Address, IP Address, Subnet Mask,
DHCP Server, Start IP Address, and End IP Address. To view
the DHCP Clients Table, click DHCP Clients Table.
MAC Address The MAC Address of the Gateway’s local
interface is displayed here.
IP Address This shows the Gateway’s IP address, as it
appears on your local network.
Subnet Mask This is the Gateway’s Subnet Mask.
DHCP Server The status of the Gateway’s DHCP server
function is displayed here.
Start IP Address This is the starting IP address of the
range of IP addresses used by devices on your local
network.
End IP Address This is the ending IP address of the range
of IP addresses used by devices on your local network.
DHCP Clients Table Click DHCP Clients Table to show
the current DHCP Client data. The DHCP Clients Table
displays the MAC address, computer name, and IP address
of the network clients using the DHCP server. (This data
is stored in temporary memory and changes periodically.)
To delete a client from the DHCP server, select the client,
then click Delete. Click Refresh to refresh the screen. Click
Close to close the screen.
DHCP Clients Table
ARP/RARP Table Click ARP/RARP Table to show the
current ARP/RARP Table. This table displays the MAC
address and IP address of the network clients using ARP/
RARP. Click Refresh to refresh the screen. Click Close to
close the screen.
ARP/RARP Table
Click Refresh to refresh the Local Network screen.
The Status Tab > DSL Connection
The DSL screen displays status information for your DSL
connection.
Status > DSL Connection

DSL Status

The DSL Connection information that is displayed includes
the Status, Downstream Rate, and Upstream Rate.

PVC Connection

The PVC Connection information that is displayed includes
Encapsulation, Multiplexing, QoS, Pcr Rate, Scr Rate,
Autodetect, VPI, VCI, and PVC Status.
Click Refresh to refresh the screen.