![](/images/new-backgrounds/1266527/26652719x1.webp)
Instant Broadband Series
Buttons
The Reset Button Details on the Reset button are found on page 7.
The 3-Port Router’s Front Panel LEDs
The LAN Indicators |
|
Power | Green. The Power LED lights up green when the |
| Router is powered on. |
Link/Act | Green. The Link/Act LED serves two purposes. If |
| the LED is continuously lit up, the Router is suc- |
| cessfully connected to a device through the corre- |
| sponding |
| ers, then that port is sending or receiving data to |
| and from the network. |
Full/Col | Green. The Full/Col LED also serves two purpos- |
| es. If this LED is continuously lit up, the connec- |
| tion made through the corresponding port is suc- |
| cessfully running in Full Duplex mode. If the |
| LED is flickering, the connection is experiencing |
| collisions. Infrequent collisions are normal. |
| If this LED flickers too often, there may be a |
| problem with your connection. See the |
| Troubleshooting section if you have problems. |
EtherFast Cable/DSL Routers
100 | Orange. The 100 LED lights up when a |
| successful 100Mbps connection is made |
| through the corresponding port. If this |
| LED does not light up, then your connec- |
| tion speed is 10 Mbps. |
USB | The USB LED lights up when the USB |
| port is successfully connected to a PC, |
| USB hub, or other USB device. |
The WAN Indicators | |
Link | Green. The Link LED lights up when a successful connec- |
| tion is made between the Router and your broadband device |
| or network. |
Act | Green. The Act LED flickers when the Router is sending or |
| receiving data over the broadband WAN port. |
Diag | Orange. The Diag LED lights up when the Router goes |
| through its |
| off upon successful completion of the diagnosis. This LED |
| will also light up when you make changes in the Utility and |
| click Apply to save them. |
If this LED stays on for an abnormally long period of time, see the Troubleshooting section.
13 | 14 |