PPPoE
Make sure you complete the
following steps.
a. Select PPPoE as the WAN
Connection Type.
b. Enter the User Name and
the Password you received
from your ISP.
c. Click the Applybutton follow
by the Continue button to
save the settings.
d. Click the Status tab,followed
by the Connect button, to
start the connection.
102
E3
E. If you haven’t already done so,click the Apply button to save the settings.
F. Reset the power on your DSL modem and restart your computers. They will
now obtain the Router's new settings.
Note:You only need to configure the Router from one computer. If you need
advanced setting information,please refer to the Linksys support website at
support.linksys.com
Congratulations! You’ve suc-
cessfully configured the Router.
You can test the setup by
opening your web browser from
any computer and entering
www.linksys.com/registration.
If you are unable to reach our
website, you may want to
review what you did in this
section or refer to the Help
section in this Fast Start guide.
103
Instant Wireless™ Series Wireless Access Point Router with 4-Port Switch
E5