Linksys EG1032 V3 manual Installing the Diagnostic Utility, Welcome Screen

10/100/1000 Gigabit Network Adapter

Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility

Overview

Follow the instructions in this chapter to install and use the Diagnostic Utility.

Installing the Diagnostic Utility

1.Power on your computer.

2.Insert the Setup CD into your computer’s CD-ROM drive. After a few seconds, a screen will appear, showing the Utility’s files. Select LinksysDiag_98_ME.exe if you are running Windows 98 or Window Me. Select LinksysDiag_2k_XP if you are running Windows 2000 or Windows XP.

If this screen does not automatically appear after a few seconds, select Run from the Start menu and enter d:\winutility in the field (if “D” is the letter of your CD-Rom drive).

Figure 9-1: Select Windows Operating System

3.The Welcome screen will appear to begin installing the Utility. To continue with the installation, click the Next button. To close the installation program, click the Cancel button.

Figure 9-2: Welcome Screen

Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility 20

Overview