10/100/1000 Gigabit Network Adapter
Using the Diagnostic Utility
After you’ve installed the Diagnostic Utility, an icon will appear in your Windows System Tray.
You can also run the Utility from the Programs menu by clicking Start, selecting Programs, selecting Linksys, selecting GigaUtility, and clicking LinksysDiag.
This will open the Utility’s main screen. Click the Adapter (Linksys 1032 v3) to display the Adapter’s general information.
The main Utility screen will provide seven choices: General, VLAN, Driver, Diagnostics, Statistics, Cable, Wake on LAN.
General
The General screen will display the Adapter’s current functions and settings.
This screen displays such settings as the Adapter’s MAC Address, IP Address, Link Speed, Duplex Speed and others.
Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility
Figure 9-1: The Utility’s Icon
Figure 9-2: The Utility’s menu
Figure 9-3: Opening the Utility from the Programs menu
Figure 9-4: The Utility’s General screen
22
Using the Diagnostic Utility
