Linksys WAP200RF manual Administration Reboot Tab, Administration Config Management Tab

Models: WAP200RF WAP200

1 74
Download 74 pages 50.69 Kb
Page 44
Image 44

Wireless-G Access Point with Power Over Ethernet and Rangebooster

3.On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field provided, or click the Browse button to find the file.

4.Click the Upgrade button, and follow the on-screen instructions.

Help information is available on the right side of the screen.

The Administration - Reboot Tab

On this screen you can reboot the Access Point.

Reboot

This feature is useful when you need to remotely reboot the Access Point.

Device Reboot. To reboot the Access Point, click the Yes radio button.

Click Save Settings to apply your change and the Access Point will reboot itself, or click Cancel Changes to cancel your change. Help information is available on the right side of the screen.

The Administration - Config Management Tab

On this screen you can create a backup configuration file or save a configuration file to the Access Point.

Config Management

Use this screen to upload or download configuration files for the Access Point.

Save Configuration. To save a backup configuration file on a computer, click the Save Configuration to File button and follow the on-screen instructions.

Restore Configuration. To upload a configuration file to the Access Point, enter the location of the configuration file in the field provided, or click the Browse button to find the file. Then click the Load button.

Help information is available on the right side of the screen.

Chapter 6: Configuring the Wireless-G Access Point

Figure 6-26: Administration - Reboot

Figure 6-27: Administration - Config Management

38

The Administration - Reboot Tab

Page 44
Image 44
Linksys WAP200RF manual Administration Reboot Tab, Administration Config Management Tab