AP Mode, Security Monitor, Administration | Linksys WAP200 manual

Wireless-G Access Point with Power Over Ethernet and Rangebooster

•Advanced Wireless Settings. Use this screen to configure the Access Point’s more advanced wireless settings.

•VLAN & QoS. Use this screen to configure VLAN and QoS settings.

AP Mode

Use this screen to configure the Access Point mode. The three available modes are Access Point, Wireless Repeater, and Wireless Bridge.

Security Monitor

•Basic Settings. Use this screen to configure the Access Point’s security monitor capabilities. You will be able to monitor your wireless network through a client utility on administrator’s PC.

•Event Log. Use this screen to determine the events that should prompt notification and the notification recipient settings.

Administration

You will use the Administration tabs to manage the Access Point.

•Management. This screen allows you to customize the password and Simple Network Management Protocol (SNMP) settings.

•Log. Configure the Log settings for the Access Point on this screen.

•Factory Default. Use this screen to reset the Access Point to its factory default settings.

•Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

•Reboot. Use this screen to reboot the Access Point.

•Config Management. You can save the configuration file for the Access Point to your PC, as well as restore the backup configuration file to the Access Point.

Chapter 5: Setting Up the Wireless-G Access Point

snmp: the standard network management protocol on the Internet.

firmware: the software image that runs on a CPU inside a networking device.

14

Navigating the Utility

Image 20

Linksys WAP200RF manual AP Mode, Security Monitor, Administration

Contents

User Guide How to Use this User Guide Copyright and Trademarks Table of Contents Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Example of a Simple Wireless Network List of Figures 20 Security Monitor Basic Settings Introduction Welcome What’s in this User Guide? Introduction What’s in this User Guide? Roaming Planning Your Wireless NetworkNetwork Topology Network Layout Example of a simple wireless network Getting to Know the Wireless-G Access Point LEDs Access Point’s port are located on the back of the device Ports Desktop Placement and Antenna Setup Antennas and Positions Connection Connecting the Wireless-G Access PointOverview Wall-Mount Option Placement OptionsStand Option Setting Up the Wireless-G Access Point Accessing the Utility Navigating the Utility SetupWireless Security Monitor AP ModeAdministration Status Configuring the Wireless-G Access Point Setup Basic Setup TabBasic Setup Network Setup Setup Time Tab Time Wireless Basic Wireless Settings Tab Basic Settings Wireless Wireless Security Tab Wireless Security WPA-Personal aka WPA-PSK WPA2-Personal WPA2-Personal Mixed WPA-Enterprise WPA2-Enterprise WPA2-Enterprise Mixed Disable Radius Wireless Wireless Connection Control Tab Wireless Connection ControlWireless Client List Connection Control Wireless Advanced Wireless Settings Tab Advanced Settings Wireless Vlan & QoS Tab Vlan QoS AP Mode Tab MAC Address 18 Wireless Repeater Mode 19 Wireless Bridge Mode Security Monitor Accounts Security Monitor Basic Settings TabWireless Security Monitor Security Monitor Event Log Tab Mail Notification Syslog Notification Administration Management Tab Web AccessLocal AP Password Management Snmp Identification Administration Log Tab LogEmail Alert Notification Queue Length Administration Factory Default Tab Administration Firmware Upgrade TabFactory Default Firmware Upgrade Administration Reboot Tab Administration Config Management TabReboot Config Management Local Network Status Local Network TabInformation Status Wireless Tab Wireless Network Wired WirelessStatus System Performance Tab System PerformancePage Appendix a Troubleshooting Frequently Asked Questions What Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Page Appendix C Upgrading Firmware Network Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix F Specifications 802.11F Wireless Roaming Dhcp Client 11g 14 dBm11.g 54Mbps@ -72dBm, 11.b 11Mbps@ -85dBM Security Certification Wireless Security MonitorSuspicious network events Appendix G Warranty Information Limited Warranty Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Information section in this Guide Appendix I Contact InformationNeed to contact Linksys?