Linksys WAP200RF manual Administration Management Tab, Web Access, Security Monitor Server

Models: WAP200RF WAP200

1 74
Download 74 pages 50.69 Kb
Page 40
Image 40

Wireless-G Access Point with Power Over Ethernet and Rangebooster

Security Monitor Server

This is a special Syslog server that can record all security monitor events instead of selected events. Server IP Address. Enter the IP address of the server.

The Administration - Management Tab

On this screen you can configure the password, Web Access, and SNMP settings.

Management

You should change the username/password that controls access to the Access Point’s web-based utility to prevent unauthorized access.

Local AP Password

User name. Modify the administrator user name. The default is admin.

AP password. Modify the administrator password for the Access Point’s web-based utility. The default is admin. Re-enter to confirm. To confirm the new password, enter it again in this field.

Web Access

To increase the security on accessing the web-based utility, you can enable HTTPS. Once enabled, users need to use https:// when accessing the web-based utility.

Web HTTPS Access. The default is Disabled.

Wireless Web Access. Allow or deny wireless clients to access Web based Utility. The default is Disabled.

Chapter 6: Configuring the Wireless-G Access Point

Figure 6-22: Administration - Management

34

The Administration - Management Tab

Page 40
Image 40
Linksys WAP200RF manual Administration Management Tab, Web Access, Security Monitor Server, Local AP Password