Wireless-G Business USB Network Adapter with RangeBooster
Default Gateway - Enter the IP address of your network’s Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
Click the Next button to continue, or click the Back button to return to the previous screen.
3.The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio button if you want to connect to a wireless router or access point. Click the
Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point.
SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is
Click the Next button to continue, or click the Back button to return to the previous screen.
4.If you chose Infrastructure Mode, go to Step 5 now. If you chose
Select the correct operating channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting.
Click the Next button. Click the Back button to change any settings.
5.If your wireless network does not have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 6.
If your wireless network has wireless security, select the method of security used: WEP, WPA/WPA2- Personal,
Chapter 4: Setting up and Connecting the
Figure 4-12: Ad-Hoc Mode Settings
encryption: encoding data transmitted in a network.
wep (wired equivalent privacy): a method of encrypting network data transmitted on a wireless network for greater security.
Figure 4-13: Wireless Security - WEP
13
Setting up the Adapter
