Installation & Operation Manual
10 Operating information (continued)
Boiler Configuration - This line shows the current configuration of the two control modules inside the unit.
Outlet Water Temperature - This is a calculated temperature based on the readings of the outlet temperatures of the two
(2) heat exchangers.
System Water Temperature - This is the water temperature as measured by the system supply sensor located in the downstream piping.
Inlet Water Temperature - This is a calculated temperature based on the inlet temperature readings from the two (2) heat exchangers.
Hot Water Tank Temperature - This is the temperature as measured by the tank sensor in the hot water storage tank.
Time - The time is displayed in the upper
Details button - Pressing this button brings up the Details Screen. This screen shows the status of the various safeties, inputs, and outputs to each control module. Reference the Details Screen section in the SYNC Service Manual for more information regarding this screen.
Main button - Pressing this button brings up the Main Screen. From this screen navigation to eight (8) other screens is possible. Reference the Main Screen section on page 56 of this manual for more information regarding this screen.
55