Tuner
Initial installation FM
The
Press the button long.
The ”Tuner” is active on the Auro, the FM wavelength is
switched on.
In the Auro display, 1ST INST and WAIT. Auro searches the FM range for stations with adequate reception quality and enters these stations in a list. This process may last a few minutes. At the end of this process, the first station in this list is played. The number and name of this station are shown in the display. Auro can be operated normally from now on.
If the played station has an RDS name, the RDS name will be displayed.
RDS . lights up additionally in the display.
First installation AM
Change to the AM wavelength:
Press the button or
press the button on the unit until “TUNER” appears in the
Source display.
The tuner changes to the AM wavelength. Here, too, first instal- lation is carried out as for the FM.
Selecting station/program place
Regardless of whether or not the station table is displayed, you can select sta- tions in the following way:
Press P+ for station forward or P- for station backwards.
or:
Enter the number of the desired station with the numeric keys.
Back to the previously played station:
Press the yellow button.
Station table
Note: This function is only available, if Auro and the TV set are connected by an
In both wavelengths, you get the station table after pressing the OK button, here, an example for the FM wavelength:
Radio: | 8 DLF |
|
| Numerical | ||
| AUDIO IN |
| 9 | S | ||
| AVS |
| 10 | MDR INFO | S | |
| AV2 |
| 11 | MDR FIGA | S | |
| AV1 |
| 12 | NDR KULT | S | |
1 | B5 AKTL | S | 13 | SWR1 | S | |
2 | BAYERN 1 | S | 14 | SWR2 | S | |
3 | BR4 KLSK | S | 15 | WDR3 | S | |
4 | SUNSHINE | S | 16 | WDR5 | S | |
5 | ROCK ANT | S | 17 | OESTER 1 | S | |
6 | ANTENNE | S | 18 | MDR JUMP | S | |
7 | DLR | S | 19 | JAZZ RAD | S | |
8 | DLF | S | OK | 20 | BLUSAT20 | S |
18:00 - 18:10 Nachrichten |
|
|
OK Switch to ... | Scan stations | END |
0 ... 9 Select station | Previous station | MENU |
Screen off/on | Change sorting | EPG |
|
|
|
The
29 stations have been found in the initial installation and entered in the station table.
Stations with RDS names are placed at the beginning of the list followed by the stations which do not transmit an RDS name. These transmitters are listed with their reception frequency.
The station table for AM holds a maximum of 24 stations.
You can hide the station table with the button 
.
Automatic station search
You can create a new list of stations and have it entered in the station table at any time separately for every wavelength. All the previously saved stations are then deleted of course.
Store Press the button on the device for at least 5 seconds.
You will see the frequency in the Auro display. If a station is found it will dwell longer on this frequency. A new station table is created. At the end of this process, the first station of the newly created station table is played. Auro can be operated normally from now on.
- 36
