Loewe Auro 2216 PS manual Cleaning, For your safety, Technical requirements for L-Link

Welcome

Cleaning

•Only clean your DVD-Preceiver with a damp, soft, clean cloth (with no aggres- sive cleaning agents).

•If DVD-Preceiver fails to read the disc correctly, the reader unit in the device may be soiled. Use a commercially-available cleaning disc.

•Always keep the disc drawer closed to prevent dust getting into the drawer and onto the lens.

For your safety

For your own safety and to avoid unnecessary damage to your unit, please read and follow the safety advice below:

•This DVD-Preceiver is only to be used for receiving, displaying and playing visual and sound signals.

•Switch off your DVD system (Centros, TV and any other audio components which may be connected) before connecting or disconnecting other devices or speakers.

• Do not open up the hous- ing, or you could be directly exposed to the laser beam. The laser beam will be visible if the unit is open.

DO NOT LOOK INTO THE LASER BEAM.

Protect your DVD-Preceiver from:

•liquids and damp

•shock and mechanical stress

•magnetic and electrical fields

•cold, heat, direct sunlight and extreme fluctuations in temperature

•dust

•anything which obstructs ventilation

•manual interference with the unit‘s interior

Your Auro has only been designed for use in a domestic environment. The war- ranty covers this normal use of the DVD-Preceiver.

PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED OUT BY A LOEWE DEALER.

If you have moved the DVD-Preceiver from a cold to a warm environment, leave it to stand for about an hour because of the risk of condensation building up. Do not switch it on until it has reached room temperature. This will avoid seriously damaging the components.

Read this operating manual, and experiment with your new equipment‘s features so that you are familiar with it.

Advantages of connection to a Loewe TV set

If you connect your Auro to a Loewe TV, you are able to enjoy the Loewe system communication ”L-Link”. With L-Link, Auro and your TV join forces in an intel- ligent network and form a high-performance home cinema system.

Auro and the TV exchange data via the L-Link, among other things to check whether audio data are available (screen stays off) or whether audio and video data are available (screen switches on automatically).

Thanks to L-Link your TV assumes that Auro will take over processing of all audio signals within the equipment network. The Auro switches on automatically when you switch on the TV.

You can operate the whole equipment network with ”one hand” using the Assist remote control.

Technical requirements for L-Link

•Loewe TV of chassis generation Q/S/P25xx TV software as of Version 6.0; if your TV is equipped with an older software, please contact your Loewe dealer for a software update

•• L-Link cable connection must be established in a powerless state; see page 8/9.

•Auro must be connected to the Euro AV-input AV2/3 of the TV; see page 9.

-