Loewe Auro 2216 PS About operation, Activate the mode of the remote control, Inserting a disc

About operation

Auro is a DVD-Preceiver. It covers the scope of functions of a DVD player (”DVD/CD”) and a radio receiver (”Tuner”) for medium wave (AM) and VHF (FM). Processing and transfer of the audio signals take place in a pre-amplifier with different decoders. This allows you to set various sound modes – depending on the format of the sound source (e.g. DVD, Tuner, TV …).

You can switch between the sub-devices by either pressing the Source button on Auro or by making the appropriate setting on the remote control. When you switch over with the buttons on Auro, you must set the RC4A to the correspond- ing remote control mode. There is no need for this adaptation of the Auro and the remote control when you switch with the remote control. Therefore, we recommend you to switch between the sub-devices with the remote control. When you select the operating mode with the buttons , the appropriate device is switched on unless it already was.

You can operate the various Loewe units with the RC4A remote control (see page 41).

Operation of the Auro with a DVD inserted is described in this chapter. Operation is performed with the remote control.

When you insert a DVD in Auro (see pg. 19), you can follow the description below on your remote control.

Activate the mode of the remote control

Set the remote control to DVD Preceiver mode.

Inserting a disc

Press the button on the device.

The disc drawer is opened, OPEN appears in the Auro display. Place the disc in the drawer with the labeled side up.

Press the button on the device.

The drawer is closed.

The Auro display then changes to READING . The media type is displayed (the DVD symbol lights additionally for a DVD).

The intro start playing when you insert a DVD. Then, the DVD’s own user interface is displayed (see pg. 18).

Basic functions

The basic functions are:

Start playback; button

Pause (single frame); button

Stop; button

Short key press: Go to beginning of chapter

Long key press: Search

Play A message appears on the screen after calling a basic

function. Auro therefore confirms that it has executed the called function, here,

for example, after pressing the for play.

Note: Even if the remote control is in the ”RADIO” mode you can start playing

a disc with the button. The remote control then changes automatically to the ”DISC” mode, Auro is switched over to the ”DVD/CD” sub-device, and playback of the disc begins.

Function not possible If this message appears, you have pressed a button which currently has no function.

These messages are hidden automatically after 8 seconds. To hide it earlier: Press

the button .

User interface

Every operating mode (DVD, Audio CD, etc.) has its own menu bar and own menu.

Menu bar

Call the menu bar, for example, if you want to use the DVD beyond its basic functions. The DVD menu bar consists of eight elements. Each of these elements

stands for a function. Call the menu bar with the button:

1/2	Select title (see page 0).
3/9	Select chapter (see page 0).

1 Deu	Select sound format (see page ).
D
	Select subtitles (see page 6).
1 Eng
1/3	Camera position (see page ).
T	Repeat (see page 3).
x4	Zoom (see page 3).

Auto Sound mode (see page 41).

15 -