Initial set-up

Auto set-up (TV sets with RS-232C System Interface)

➠Ensure that the devices are set up correctly (page 8/9), all cables are connected properly (page 10,13) and that the microphone is connected and positioned correctly (page 14).

Set the remote control up for TV operation.

Press the on/off button on the remote control to switch on the Loewe TV set and the Sound Projector.

Call up the TV menu.

34Select Connections.

6Change to the menu line below.

34Select Sound components.

OK Select Sound components wizard.

The selection Sound playback via ... appears.

Sound components wizard

When using a Sound projector please connect the TV socket AUDIO DIGITAL OUT to the Sound projector input TV COAXIAL. For controlling the Sound projector via the TV set please connect the RS232C(TV) socket to the RS232C(Sound projector) socket additionally.

If you have a TV set without built-in speakers, you have to select "Sound projector" only.

Sound components

Sound playback via ...

TV speakers

Speaker system

 

 

HiFi/AV amplifier

 

 

Sound projector

OK

HiFi/AV amplifier or TV speaker (switchable)

 

END

 

 

Sound projector or TV speakers (switchable)

 

 

OK Proceed

 

 

56Select Sound Projector or Sound Projector or TV speakers (switchable) (page 24).

Confirm OK.

Sound components wizard

The wizard supports to optimise the Sound projector settings for your listening positions. Up to 3 positions can be stored. You will be prompted to turn the TV set to the desired position and after that to start the Auto setup of the Sound projector.

Sound projector

 

 

Configuration/modification of Sound projector

Activate listening position

Set/change listening position

OK

OK Proceed

 

END

OK Call up menu Set/change listening position.

Sound components wizard

Select one of the three memory positions for the new sound adjustment which will be set subsequently.

Sound projector

 

 

 

Select memory position

 

Position 2 (MEM2)

Position 3 (MEM3)

Position 1 (MEM1)

OK

OK Proceed

 

 

END

34Select one of the memory positions Position 1-3(MEM1-3) .

Confirm OK.

Sound components wizard

Turn your TV set by using the cursor keys left/right to the desired listening which is optimal for your listening position and confirm with the OK key.

Sound projector

Rotate TV

END

-30 OK Proceed

If the Loewe TV set is equipped with swivel caster control, now use 34 to turn the TV to the required listening position.

Sound components wizard

Start the acoustic auto setup for the Sound projector now (please also read the manual for this). Place the microphone to the desired position. Please leave the room after pressing the OK key to avoid any disturbances. The auto setup will start after 10 seconds automatically. About 3 minutes later a final chime is played. After this follow the instructions of the wizard.

Sound projector

END

Start auto setup

OK

OK Proceed

 

OK Start auto setup.

15 -