Everyday use

TV sets without RS-232C system interface

Press the button for a long time. The menu MEMORY appears.

MEMORY

1) LOAD

2) SAVE

[] / [] : Up / Down

[OK] : Enter

56 Select the option LOAD.

Confirm OK.

1) MEMORY LOAD

MEMORY1

MEMORY2

MEMORY3

[] / [] : Select

[OK] : Enter

56 Select the option MEMORY1-3.

Confirm OK 2x.

All settings you made previously that you did not save are lost when you load the content of the memory.

Select sound mode

You can choose between different surround sound modes. Select sound mode by pressing several times.

5 Beam The sound beams from all 5 channels are emitted.

The surround sound effects come into their own when they play back media recorded in multichannel format.

Stereo+3 Beam The sound is emitted directly in stereo via the left and right front channel as well as via the centre channel. The left and right surround channel are emitted via sound beams.

This mode is suitable for playing back live recordings for example. Singing and instrumental sounds can be appreciated best near the middle position, whilst the sound reflections generated on site can be heard on your left and right.

3 Beam The left front and surround channel, as well as the right front and surround channel, are emitted via sound beams.

The centre channel is emitted directly. This mode is most suitable for watching films with the whole family due to the extended listening position range. You can also use this mode if the listening position is near the back wall meaning that the left and right surround beam can not be reflected.

Stereo The sound is emitted in stereo via the left and right front channel.

- 20