Troubleshooting

Error messages for auto set-up

Error Message

Possible cause

Remedy

ERROR E-1

Your listening room has too much unwanted noise.

Ensure that it is as quiet as possible in your listening room. We recommend

 

 

choosing a time of day when there is less noise outside.

 

 

 

ERROR E-2

The optimisation microphone was disconnected during auto set-up .

Ensure that the optimisation microphone is firmly connected to the unit

 

 

(page 14).

 

 

 

ERROR E-3

During auto set-up other operating processes were run on this unit.

During auto set-up do not carry out any other

 

 

operating processes.

 

 

 

ERROR E-4

The optimisation microphone is not in front of this unit.

Ensure that the optimisation microphone is positioned in front of this unit.

 

 

 

ERROR E-5

The optimisation microphone is not positioned at the right distance from

Ensure that the optimisation microphone is more than 1.8 m from the front

 

this unit.

of the unit and is within 1 m of the average height of the unit.

 

 

 

ERROR E-6

The optimisation microphone can not receive the noise produced by this

Ensure that the optimisation microphone is firmly connected to this

 

unit because the noise output level is too low.

unit and has been set up properly. If the problem persists, contact your

 

 

Loewe dealer.

 

 

 

ERROR E-7

An internal system error has occurred.

Repeat auto set-up.

 

 

 

ERROR E-8

The measurement did not end at the expected time

Repeat auto set-up.

 

and was cancelled.

 

 

 

 

ERROR E-9

Cancelled by user

Repeat auto set-up.

 

 

 

Special functions

The Sound Projector has got additional setting options which are only intended for specialist staff.

Press button for a long time. The menu SETTINGS appears.

➠Unless you have sufficient expertise, do not make any changes to the settings in this area, as this may maladjust the unit to the extent that it no longer works properly afterwards.

Press the button for a long time to close the menu.

- 26