Everyday use

Sound menu functions for Loewe TV sets with RS-232C System Interface

If the Sound Projector is being operated in connection with a Loewe TV set with an RS232C system interface (page 10), some special menus will appear on the TV set.

Call up the TV menu.

34 Select Sound.

Change to the menu line below.

34Select required option.

Sound mode

Refer to page 20.

Subwoofer

Here you can set individual parameters for a Loewe Individual Sound-System (Subwoofer) connected to the Sound Projector via Loewe Audio Link (page 10).

Connected select yes / no

Cross over frequency 80 / 100 / 120 Hz

LFE level -20 dB ... 0 dB

Distance to listening position

Room parameter

Here you can set the parameters for setting up the system in your environment. Mounting Shelf / Wall

Reflections Normal / Echo

Dolby Digital/DTS dynamic range

Here you can set parameters for the required dynamics range of the Sound Projector.

Select DD/DTS dynamics range Min / Standard / Max

Sound from Sound Projector

Here you can set the sound playback with analogue signals. Select sound from Sound Projector Stereo / Mono

2 sound transmission Select sound 1 / sound 2

Sound via

Here you can select whether you want to play back the sound through the loudspeaker built in to the TV set or using the Sound Projector. To do so, in the menu Sound components - Sound playback via ... choose the setting Sound Projector or TV set (switchable) (page 15).

Sound via TV / Sound projector

Sound menu functions for Loewe TV sets without RS-232C System Interface

You can make basic changes in the Sound menu on the Sound Projector. Press the button briefly. The SOUND MENU appears.

1) SOUND MENU

A) TONE CONTROL

B)SUBWOOFER SET

C)MUTE LEVEL

D)AUDIO DELAY

E)ROOM EQ

F)DD/DTS DYNAMIC RANGE

[] / [] : Up / Down

[OK] : Enter

56 Select required option.

TONE CONTROL You can set the proportion of Highs and Lows. SUBWOOFER SET You can set parameters for the subwoofer, such

as Bass output, Transfer frequency, Level and Distance from listening position.

MUTE LEVEL You can set the level to which the sound drops with Sound off (page 19).

AUDIO DELAY You can set the delay time between sound and picture to obtain synchronised playback.

ROOM EQ Here you can set the parameters for setting up the system in your environment. Under SET-UPyou can select: SHELF / WALL;

for REFLECTIONS: NORMAL / ECHO DD/DTS- Here you can set parameters for the required

DYNAMIC RANGE Setting the dynamic range of the Sound Projector. You can select: Min / Standard / Max.

Confirm OK. Close menu.

- 24