Initial set-up

Set-up solutions

You can arrange your Sound Projector in different set-ups depending on which other equipment you are connecting to it and the layout of the room. You are urgently recommended to use the set-up solutions intended and tested by Loewe. Pay attention to the advice given in the respective enclosed instructions for set-up.

Wall mounting

You can use the wall bracket supplied to mount your Sound Projectors on the wall opposite your listening position.

Mounting on a table

You can use the "Table Stand I Sound Projector" which can be supplied as an accessory to set up your Sound Projector on a flat surface.

Mounting on a floor stand

You can use the "Floor Stand 5 MU" which can be supplied as an accessory to set up your Sound Projector on the floor in connection with a Loewe TV set.

Please ask your Loewe dealer about other set-up solutions.

Connecting the Sound Projector

You can connect various sound sources to the Loewe Sound Projector.

Loewe TV sets from Chassis Digital+ HD100 [L2710] upwards. The device combination Loewe Sound Projector and Loewe TV set (from Chassis Digital+ HD100 [L2710]) is particularly easy to connect and operate (refer to page 10 onwards).

Loewe TV sets without RS-232C system interface (page 11).

Additional accessories. Refer to page 12.

-