Vent Requirements

Installation (for qualified installers only)

1 1

!Always maintain the required 1” clearance (air space) to combustible materials to prevent a fire hazard. Do not fill air spaces with insulation.

!The gas appliance and vent system must be vented directly to the outside of the building, and never be attached to a chimney serving a separate solid fuel or gas-burning appliance. Each direct vent gas appliance must use it’s own separate vent system.

•This appliance is equipped only for altitudes 0-2000 feet. However, our in-house testing has shown that the unit operated at altitudes to 8000 ft.

!Failure to adjust the air shutter properly may lead to improper combustion which can create a safety hazard. Consult your dealer or installer if you suspect an improperly adjusted air shutter.

•When the vent passes through a wall, a wall thimble is required. When the vent passes through a ceiling, a support box or firestop is required. When the vent passes through the roof, a roof flashing and storm collar are required. Follow the instructions provided with the vent for installing these items.

Vertical Termination NOTE: always use the "high-wind" version (if applicable)

Use a roof flashing and storm collar whenever passing through the roof

Use a firestop spacer whenever passing through a ceiling

Minimum framing for fire stop

8-5/8"

Use a support box on exposed vent

Use a firestop whenever passing through a wall

8-5/8"

Minimum Framing for wall thimble

Maintain a minimum 1" clearance from vent to any combustible.

Vertical Vent

Requirements

Maintain a minimum 1" clearance from vent to any combustible

Horizontal Vent

Requirements

Horizontal Termination

•Use of of the following 6-5/8" diameter co-axial gas direct vent systems:

Manuafacturer	S e r i e s

Simpson Dura-Vent	Model GS

Selkirk Hearth Products	Direct-Temp

American Metal Products	Ameri-Vent

Metal-Fab Inc.	Direct-Vent with 4DHT or 4DVT Cap

N O T E: Always use the high-wind cap for the type of vent you are using (if applicable)

•Slide the vent sections together and turn 1/4 turn until the sections lock in place.

•Screws are not required to secure the vent. However, three screws may be used to secure vent sections together if desired.

• High temperature sealant is recommended at the appliance starter section connection (use high-temperature silicone or Mill-Pac® ).

•If disassembly is required, at time of re-assembly check to see if the vent creates a tight

fit. If it does not, apply high temperature sealant to the joints of the affected sections.

• Horizontal sections require a 1/4" rise every 12" of travel

• Horizontal sections require non-combustible support every three feet (e.g.: plumbing tape)

Travis Industries

1 0 0 - 0 1 1 4 2

4 0 5 0 1 1 4

Direct Vent Freestanding Stove specifications

The Lopi Direct Vent Freestanding Stove stands out as a leading choice for homeowners seeking efficient and elegant heating solutions. Known for its innovative design and advanced technology, the stove combines aesthetic appeal with exceptional performance, making it an ideal addition to any living space.

One of the main features of the Lopi Direct Vent Freestanding Stove is its direct venting system. This technology allows the stove to draw air from outside for combustion and eject exhaust gases outdoors, ensuring optimal indoor air quality. This not only enhances efficiency but also eliminates the need for a traditional chimney, making installation simpler and versatile.

The stove's design is both modern and traditional, featuring clean lines and a variety of finishes to complement any décor. Available in different sizes, the Lopi stove can fit comfortably in various spaces while providing powerful heating. Its large viewing window invites warmth and ambiance, allowing users to enjoy the mesmerizing flames without compromising heat output.

Boasting impressive heating capabilities, the Lopi Direct Vent Freestanding Stove has a high BTU output, effectively warming spaces even in the coldest of climates. The unit is equipped with a robust heat exchanger that maximizes heat retention while minimizing fuel consumption. Furthermore, the stove can operate using either natural gas or propane, offering flexibility based on availability and preference.

In terms of efficiency, many models in this line come with an EPA certification, demonstrating a commitment to environmentally friendly practices. With features such as adjustable flame settings and a thermostatic remote control, users can easily customize their heating experience, ensuring comfort at all times.

Safety is also a priority with the Lopi Direct Vent Freestanding Stove. It includes built-in safety features such as a protective screen and cool-to-the-touch body, making it suitable for homes with children or pets. The durable construction ensures longevity, with high-quality materials designed to withstand the test of time.

In summary, the Lopi Direct Vent Freestanding Stove combines sleek aesthetics with cutting-edge technology to deliver an unparalleled heating solution. With its array of features, efficiency, and safety measures, it not only enhances home comfort but also adds a touch of elegance to any living environment. Whether enjoying the warmth on a chilly evening or creating a cozy atmosphere, the Lopi stove stands out as a top choice for modern homeowners.

Lopi Direct Vent Freestanding Stove owner manual Vent Requirements, Manuafacturer R i e s

Models: Direct Vent Freestanding Stove