Selecting Any Plotter Item With the Cursor
1.Use the zoom keys and the arrow keys to move around the plotter and find the item you wish to select.
2.Use the arrow keys and center the cursor
Navigate to Cursor Position on Plotter
The GO TO CURSOR command navigates to the current cursor position on the plotter. It's a quick and handy way to navigate to anything you can see on the plotter display.
1.Use the cursor (controlled by the arrow keys) with the zoom in and zoom out keys to maneuver around the plotter until you find a location you want to go to.
2.Center the cursor over the location to select it. See the example in the following figure.
3.Press MENUENT and the M52 Pro will begin navigating to the cursor location.
The Plotter Page will display a dotted line from your current position to the cursor position. The Navigation Page displays a compass rose showing navigation information to your destination. See the following examples.
The Plotter Page at left clearly shows the course line connecting your current position to your destination. The Navigation Page, right, will also show navigation information.
59
