Lowrance electronic Fish Finder manual Position Pinning, Pop-up Help

Tip:

If you wish, you can change the displayed data font size when you select a data type:

1. From the Plotter or Sonar page, press
MENU↓ to OVERLAY DATAENT.
2. Press ↓ or ↑ to select Data Typepress → or	Overlay Data
← to select Data SizeENT.

The data will be shown in the new font size. To return to the previous page, press EXITEXIT.

Pop-up Help

Help is available for virtually all of the menu labels on this unit. By highlighting a menu item and leaving it highlighted for a few seconds, a pop-up message appears that describes the function of the menu item. This feature is on by default.

System Setup Menu, left, with Pop-up Help command highlighted. At right, this example shows the Pop-up Help message for the Sensitivity command, located on the Sonar Menu.

To turn on Popup Help:

1.Press MENUMENU↓ to SYSTEM SETUP↓ to POPUP HELP. With the op- tion highlighted, press ENT to check it (turn on) and uncheck it (turn off). After the option is set, press EXIT to return to the page display.

Position Pinning

When you are standing still or moving at extremely slow speed, a GPS receiver can have trouble determining the direction you are traveling. In the past, this resulted in a wandering plot trail that moved around the plotter, even if you were standing still.

89