Lowrance electronic Fish Finder specs

Navigation Page,

backtracking a trail.

Track or compass heading indicator, showing direction of travel

Compass

rose

Present

Trail line position arrow

Navigation information displays

Navigation Page, recording a trail, traveling east. Page looks like this when the unit is not navigating to a waypoint , following

a route, or backtracking a trail.

When navigating to a waypoint, the Navigation screen looks like the following figure. Your ground speed, track, distance and bearing to waypoint, and course are all shown digitally on this screen.

NOTE:

Remember, when the Speed, Track and Position information dis- plays are flashing, satellite lock has not been

achieved and no position fix has been deter- mined. A question mark will also flash on the present position arrow in the center of the compass rose.

The Off Course window shows the current cross track error, illustrated in the figure below. This shows the distance you are off-course to the side of the desired course line. The course line is an imagi- nary line drawn from your position when you started navigating to the destination waypoint. The course line is shown on the Navigation Page screen (and the Plotter Page screen) as a dotted

line. The cross track error range is shown on the compass rose as a wide, white, corridor enclosing the course line. The outer edges of this

56

Image 58

Lowrance electronic Fish Finder manual

Contents

M52 Pro Visit our web site Table of Contents Split Zoom Sonar Chart Index Page Sonar GeneralBack-up memory Sonar sounding GPS How to use this manual typographical conventionsGraphic symbols for Waypoints or event Receiver/antenna Transducer Installation Preparations Recommended Tools and supplies Selecting a Transducer Location How low should you go? Shoot-thru-hull vs. Transom Mounting Transom Transducer Assembly and Mounting Insert bolt and check transducer position on transom Transom Trolling Motor Bracket Installation Transducer Orientation and Fish Arches SHOOT-THRU-HULL Preparation Testing Determines Best LocationHulls With Floatation Materials Transducer location High speed Trolling speed Shoot-thru-hull Installation Power and Cable Connections Page In-Dash Installation Mounting the Sonar Unit In-Dash or Bracket Bracket Installation 107.5 82.7 156 Depress ratchets to Release. Swivel base Portable Sonar Installation Installing the Batteries Portable transducer installed on boat transom Section Basic Sonar Operation Keyboard Main Menu Sonar Menu Commands Sonar Menu Basic Sonar Quick Reference Pages Sonar Operations Fish Symbols vs. Full Sonar Chart Important TipPage Alarms ASP Advanced Signal Processing Zone Alarm Press MENUMENU↓ to ALARMSENT↓ to Sonar Alarmsent Fish Alarm Chart Speed Depth Cursor Depth Range Automatic Depth Range Manual Depth Range Upper and Lower Limits Fish I.D. Fish Symbols & Depths FasTrack FishTrack Grayline→ Overlay Data Ping Speed & HyperScroll Sensitivity & Auto Sensitivity Reset OptionsAutomatic Sensitivity Keel and Waterline Offset Keel Offset Full Sonar Chart Sonar Color ModeSonar Chart Display Options Waterline Offset Digital Data/Chart Split Zoom Sonar Chart Sonar Simulator Pro TipsFlasher Zoom & Zoom Bar Stop ChartSurface Clarity Zoom Pan Unit wont turn on Unit operates only in demo modeUnit freezes, locks up, or operates erratically No fish arches when the Fish I.D. feature is off Noise Section Basic GPS Operations Main Menu Sonar Pages Satellite Status Navigation Page Position Plotter Viewing the Plotter Zoom & Cursor Arrow Keys Selecting Any Plotter Item With the Cursor Navigate to Cursor Position on Plotter GPS Quick Reference Waypoints Cancel NavigationFind Distance between Points Create a Waypoint Press WPT↓ to Create Newent Delete a Waypoint Edit a Waypoint Find a WaypointSelect a Waypoint Navigate To a Waypoint Set Man Overboard MOB Waypoint Trails Navigate Back to MOB WaypointCreating and Saving a Trail Tip Display a Saved Trail Delete a TrailEdit a Trail Name Visual Trailing Navigate a TrailNavigate a Trail forward Page Navigate a Back Trail Create Icon at Current Position IconsCreate Icon on Plotter Delete an Icon Navigate to an Icon RoutesCreate and Save a Route Page Delete a Route Edit a Route Name Navigate a Route Navigate a Route backward Utilities Page Section System & GPS Setup Options Important Alarm Notes Auto Satellite Search Coordinate System Selection Map Fix Customize Position Customize Page DisplaysGPS Simulator Customize Plotter or Navigation Initialize GPS Hide GPS FeaturesPlotter Auto Zoom Plotter Orientation From the Plotter or Sonar page, press MENU↓ Position Pinning Pop-up Help Screen Contrast and Brightness Set Language Show Waas AlarmSet Local Time Sounds and Alarm Sound Styles Software Version Information Trail Options Track SmoothingDelete All Trails Main Menu, left, Trails Menu, center, Trail Options, right New Trail Units of MeasureDelete Trail Trail Visible/Invisible and Other Trail Options Main Menu, left, Units of Measure Menu, right Index Page Page 100 Navico Databases License Agreement Databases Limited Warranty Navico Full ONE-YEAR Warranty How to Obtain Service… Not toll-free Accessory Ordering Information for all countries Visit our web site