Create Waypoint by Average Position
This feature sets a waypoint at the current position after averaging several position readings.
1.Press WPT↓ to CREATE NEWENT.
2.Press ↓ or ↑ to AVERAGE POSITIONENTENT.
3.Wait while the unit takes points to average for the position. (The greater the number of points, the greater the accuracy.) When the desired number of points accumulates, press ENT to create and save the waypoint.
4.The Edit Waypoint menu appears. You can simply save the waypoint by pressing EXITEXIT or you can edit the waypoint.
Create Waypoint by by Projecting a Position
This feature sets a waypoint at a point located a specific distance and bearing from a reference position. The reference position must be se- lected from your waypoint list.
1.Press WPT↓ to CREATE NEWENT.
2.Press ↓ to PROJECTED POSITIONENTENT.
3.Press ↓ to SET REFERENCEENT. Use ↑ and ↓ to select a waypoint. When the point has been selected, press ENT and the point's position appears as the reference position.
4.Press ↑ to DISTANCEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the distance is cor- rect. Press ENT.
5.Press ↓ to BEARINGENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the bearing is cor- rect. Press ENT.
6.Press ↓ to PROJECTENT. The Edit Waypoint menu appears. You can simply save the new projected waypoint by pressing EXITEXIT or you can edit the waypoint. (Press EXITENT if you want to immediately be- gin navigating to the new waypoint.)
Delete a Waypoint
To delete a waypoint from the waypoint list: press WPTENT↓ to way- point nameENT→ to DELETEENT← to YESENT. To return to the pre- vious page, press EXITEXIT.
To delete a waypoint from the plotter:
1.Use the arrow keys to select the waypoint with the cursor.
2.Press WPT→ to DELETEENT← to YESENT. To return to the previ- ous page and clear the cursor, press EXIT.
63
