2.4.3FC Interface

The FC interface varies, depending on which LSI Logic 2 Gbit/s host adapter you have selected. Refer to Section 2.8, “Physical Characteristics,” page 2-9for details.

2.4.4FC Link Activity/Link Fault LED

The LSI Logic 2 Gbit/s host adapters provide dual-purpose LEDs that indicate activity on the FC link. These LEDs (one per port) are visible near the ports on the bracket. Figure 2.4 shows the appearance of the Link Activity/Link Fault LED that represents the given link status for each of the LSI Logic host adapters.

Table 2.4

LED Appearance to Represent Link Status

 

 

 

 

 

 

 

Adapter

 

Link

Activity

 

Fault

 

 

 

 

 

LSI7102XP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7102LXP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7202XP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7202LXP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7202EP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

 

LSI7202EP

 

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7402XP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

LSI7402EP-LC

Off

Green Blinking

 

Yellow

 

 

 

 

 

 

LSI7402EP

 

Off

Green Blinking

 

Yellow

 

 

 

 

 

 

2.5PCI System ID Values

All LSI Logic 2 Gbit/s host adapters share common PCI Vendor ID (VID) values and are assigned device ID (DID) values to allow drivers and BIOS to recognize them as 2 Gbit/s capable FC products. Table 2.1 provides the VID and DID for all LSI Logic 2 Gbit/s FC host adapters.

PCI System ID Values

2-7

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.